清洁发展机制项目运作关键问题分析与管理对策研究

清洁发展机制（CDM）项目要想能够顺利通过一系列审查并最终获得减排量,需要特别重视项目运作流程中的关键环节。针对中国CDM项目审批数量少,通过率低,耗费时间长等问题,本文在分析CDM内涵及项目运作流程的基础上,指出了中国CDM项目运作中面临的主要问题,提出了相应的管理对策与建议,期望能够为中国推进CDM项目实施提供帮助。     

污水处理设施建设与运营模式浅析

详细介绍了国外污水处理设施建设与运营的管理经验,分析了英国、美国、法国和荷兰等典型管理模式的特点,阐述了中国污水处理事业的发展历程,调研了目前国内并存的事业体制、企业化管理、委托运营、DBO（设计-建设-运营）、特许经营、股权转让、合资合作、完全私有化、用户和社区资助等模式并逐一进行分析,指出了中国污水处理设施建设与运营的发展方向,认为应尽量慎重考虑涉及产权的特许经营模式,着力推广DBO模式。     

我国废弃电器电子产品的EPR执行模式研究

延伸生产者责任,将生产者对产品所负的责任扩展到产品生命周期的消费后阶段,为＂废弃产品的环境影响责任＂找到了合理的承担主体。研究了延伸生产者责任的概念、种类及特征。以德、日、中国台湾为例,分析了发达国家及地区的废弃电器电子产品的EPR执行模式。总结了我国废弃电器电子产品回收处理的现状、原因及具体实施情况。在借鉴他国及地区成功经验的基础上,提出了我国废弃电器电子产品的EPR执行模式。     

某皮革厂皮革废水处理工程案例分析

皮革废水属于高浓度难降解有机工业废水,具有排放水量大、水质水量不均、污染物成分复杂等特点,给皮革废水处理带来极大的难度。以河北省辛集市某皮革厂废水处理工程为例,简要描述了该皮革厂皮革的生产工序、废水水量及水质特征,重点论述了皮革废水的处理方法、投资费用、运行费用及运行效果,并对该工艺所采用的理念、方法及效果进行了探讨。     

逐级化学提取法研究煤中溴的赋存状态

采用逐级化学提取法研究了煤中溴的赋存状态,用电感耦合等离子体质谱（ICP—MS）测定了煤及各种提取状态中溴的含量．结果表明,来自四川和重庆的8个煤中溴主要以水溶态、离子交换态、碳酸盐结合态、铁锰结合态和有机态存在,平均总提取率为88．2％．对于烟煤和无烟煤,前者有机态溴的相对量大于后者,平均值分别为22．3％和20．0...     

不同基质浓度下SBR进水方式对厌氧氨氧化的影响

采用厌氧SBR反应器,分别以配水培养和以实际晚期垃圾渗滤液培养的厌氧氨氧化菌为研究对象,考察了不同基质浓度下,SBR改进式连续进水方式与一次性进水方式对厌氧氨氧化工艺运行性能的影响.结果表明,当处理人工配水时,在中低进水浓度下(NO2--N￡400mg/L),与改进式连续进水方式相比,宜采用一次性进水方式运行;在高进水浓度下(NO2--N3400mg/L)改进式连续进水方式比一次性进水方式优势明显,特别是在5h改进式连续进水方式下,平均比污泥脱氮速率增加至39.11mgN/(gVSS·h),相比一次进水方式效率提高40%.当处理进水NO2--N浓度为(300±20)mg/L的实际晚期垃圾渗滤液时, 5h改进式连续进水的SBR比污泥脱氮速率最高.由于晚期渗滤液较配水成分复杂,使得厌氧氨氧化菌面临有机物和有害物质的影响,其厌氧氨氧化的反应速率低于同等基质浓度配水条件下的厌氧氨氧化反应速率.     

污泥厌氧消化技术的研究与进展

厌氧消化是目前国际上应用最为广泛的污泥稳定化和资源化的方法,随着全球性的能源危机以及各国可持续发展和环保法规的相继出台,该技术将有更加广阔的发展前景。阐述了厌氧消化的基本原理和应用情况,讨论了近年国外针对厌氧消化预处理技术和不同运行条件对厌氧消化反应效果的影响以及不同污泥处理工艺产能效果等方面研究成果及最新进展。     

Performance of completely autotrophic nitrogen removal over nitrite process under different aeration modes and dissolved oxygen

In this study, three sequential batch biofilm reactors (SBBRs) were operated for 155 days to evaluate the performance of completely autotrophic nitrogen removal over nitrite (CANON) process under different aeration modes and dissolved oxygen (DO). Synthetic wastewater with 160-mg NH4 ⁺-N/L was fed into the reactors. In the continuously-aerated reactor, the efficiency of the ammonium nitrogen conversion and total nitrogen (TN) removal reached 80% and 70%, respectively, with DO between 0.8–1.0 mg/L. Whereas in the intermittently-aerated reactor, at the aeration/non-aeration ratio of 1.0, ammonium was always under the detection limit and 86% of TN was removed with DO between 2.0–2.5 mg/L during the aeration time. Results show that CANON could be achieved in both continuous and intermittent aeration pattern. However, to achieve the same nitrogen removal efficiency, the DO needed in the intermittently-aerated sequential batch biofilm reactor (SBBR) during the aeration period was higher than that in the continuously-aerated SBBR. In addition, the DO in the CANON system should be adjusted to the aeration mode, and low DO was not a prerequisite to CANON process.     

弹药公路运输安全影响因素分析及防护

交通安全是弹药运输安全的前提条件.分析交通系统的构成要素,指出驾驶员是影响交通安全的核心因素.根据事故致因理论建立了交通安全事故模型.分析了弹药运输环境条件对弹药运输安全的影响,并提出研究运行速度与运输冲击振动环境变化的关系.最后,提出了弹药公路运输安全的3点防护对策.     

Temporal limits to simulating the future spread pattern of invasive species: Buddleja davidii in Europe and New Zealand

The spread of invasive species is a major ecological and economic problem. Dynamic spread modelling is a potentially valuable tool to assist regional and central government authorities to monitor and control invasive species. To date a lack of suitable data has meant that most broad scale dispersal models have not been validated with independent datasets, and so their predictive ability and reliability has remained unscrutinised. A dynamic, stochastic dispersal model of the widely invasive plant Buddleja davidii was calibrated on European spread data and then used to project the temporal progression of B. davidii's distribution in New Zealand, starting from several different historical distributions. To assess the model's performance, we constructed an occupancy map based on the average number of simulation realisations that have a population present. The application of Receiver Operating Characteristic (ROC) curves to occupancy maps is introduced, but with specificity substituted by the proportion of available area used in a realisation. A derivative measure, the partial area under these curves when assessed through time (pAUC), is introduced and used to assess overall performance of the spread model. The model was able to attain a high level of model sensitivity, encompassing all of the known locations within the occupancy envelope. However, attempting to simulate the spread of this invasive species beyond a decade had very low model specificity. This is due to several factors, including the exponential process of spread (the further a population spreads the more sites exist from which it can spread stochastically), and the Markovian chain property of the stochastic system whereby differences between realisations compound through time. These features are seen in many reports of spread models, without being explicitly acknowledged. Our measure of pAUC through time allows a model's temporal performance and its specificity to be simultaneously assessed. While the rapid deterioration in model performance limits the utility of this type of modelling for forecasting long-term broad-scale strategic management of biological invasions, it does not necessarily limit its attractiveness for informing smaller scale and shorter term invasion management activities such as surveillance, containment and local eradication.